
University Of Mines and Technology cut off point
UMAT has published its cut-off points for the 2024/2025 academic year.
Buy your forms at https://mcchrisconsult.com/ghana-university-forms/
Are you interested in knowing the minimum cut-off points for University Of Mines and Technology in Ghana for all courses? if yes, then you are at the right place. Additionally, this piece of writing will give you information on University Of Mines and Technology and its cut-off points for the 2024/2025 academic year.
Additionally, you can also find the cut-off points for the 2024/2025 academic year for other Technical Universities on this page. For easy reference, the listings will include the cut-off points for all courses. Therefore, you will have all the necessary information to make an informed decision.
The cut-off point for University Of Mines and Technology for WASSCE candidates is 36 and that of SSCE is 24. Candidates who score below the cut-off points will not be eligible for admission.
BSc & DIPLOMA PROGRAMMES AT MAIN CAMPUS, TARKWA
Faculty of Mining and Minerals Technology
BSc Mining Engineering |
BSc Minerals Engineering |
Faculty of Engineering
BSc Mechanical Engineering |
BSc Electrical and Electronic Engineering |
BSc Computer Science And Engineering |
BSc Mathematics |
BSc Renewable Energy Engineering |
BSc Statistical Data Science |
BSc Cyber Security |
BSc Information Systems and Technology |
Faculty Of Integrated Management Studies
BSc Logistics and Transport Management |
BSc Economics and Industrial Organization |
Faculty of Geosciences and Environmental Studies
BSc Geomatic Engineering |
BSc Geological Engineering |
BSc Environmental and Safety Engineering |
BSc Land Administration and Information Systems |
Diploma in General Drilling (Fee paying Programme) |
School of Petroleum Studies
BSc Petroleum Engineering (Fee paying Programme) |
BSc Natural Gas Engineering |
BSc Petroleum Geosciences and Engineering |
BSc Petroleum Refining and Petrochemical Engineering |
BSc Chemical Engineering |
Undergraduate Programmes – Essikado Campus
BSc & DIPLOMA PROGRAMMES AT SEKONDI-TAKORADI CAMPUS, ESSIKADO |
BSc Geomatic Engineering |
BSc Geological Engineering |
BSc Environmental and Safety Engineering |
BSc Mechanical Engineering |
BSc Electrical and Electronic Engineering |
BSc Mathematics |
BSc Computer Science and Engineering |
BSc Civil Engineering |
Diploma in Plant and Maintenance Engineering |
Diploma in Electrical and Electronic Engineering |
Available Certificate Programmes
Admissions
CERTIFICATE PROGRAMMES AT MAIN CAMPUS – TARKWA
Faculty of Engineering (FoE) |
Certificate in Welding and Fabrication |
Certificate in Plant and Maintenance Engineering |
Certificate in Electrical Technology |
Certificate in Engineering Technology (For Industry Partners only) |
Certificate in Applied Statistics |
Certificate in Cyber Security |
Certificate in Data Analytics and Machine Learning |
Certificate in Information Systems and Technology |
Certificate in Network and Systems Administration |
Certificate in Software Development |
Faculty of Geosciences and Environmental Studies (FGES)
Certificate in Survey and Mapping |
Certificate in Drone Operations and Applications |
Certificate in Water Resources |
Certificate in Geological Assistantship |
Certificate in Environmental Studies |
Certificate in Occupational Health and Safety |
Faculty of Mining and Minerals Technology (FMMT)
Certificate in Surface and Underground Mining |
Certificate in Minerals Technology |
Certificate in Metalsmithing and Jewellery Technology |
Faculty of Integrated Management Science (FIMS)
Certificate in English (For Non-English Speaking Applicants) |
Certificate in French (TC) |
Certificate in Small Scale Mine and Quarry Administration (MS) |
School of Petroleum Studies (SPetS)
Certificate in Drilling Fluids Technology |
Certificate in Natural Gas Technology |
Certificate in Oil Well Cementing Technology |
Certificate in Basic Reservoir Management |
Certificate in Process Safety and Engineering |
Certificate in Chemical Technology |
CERTIFICATE PROGRAMMES AT SEKONDI TAKORADI CAMPUS – ESSIKADO
Certificate in Survey and Mapping (SM), |
Certificate in Geological Assistantship (GA), |
Certificate in Occupational Health and Safety (HS), |
Certificate in Data Analytics and Machine Learning (DM), |
Certificate in Information Systems and Technology (IS), |
Certificate in Electrical Technology (ET), |
Certificate in Plant and Maintenance (PM), |
Certificate in Welding and Fabrication (WF). |
Certificate in Locomotive Engineering |
Certificate in Signalling and Telecommunication |
Certificate in Railway Planning and Operations |
Certificate in Geotechnical Technology |
Undergraduate – Bachelor of Science (BSc) Programmes Entry Requirements
Admissions
Faculty of Mining and Minerals Technology
BSc MINING ENGINEERING |
BSc MINERALS ENGINEERING |
Faculty of Geosciences and Environmental Studies |
BSc GEOMATIC ENGINEERING |
BSc GEOLOGICAL ENGINEERING |
BSc ENVIRONMENTAL AND SAFETY ENGINEERING |
BSc LAND ADMINISTRATION AND INFORMATION SYSTEMS |
DIPLOMA in GENERAL DRILLING |
School of Petroleum Studies
BSc PETROLEUM ENGINEERING (FEE PAYING PROGRAMME) |
BSc NATURAL GAS ENGINEERING |
BSc PETROLEUM GEOSCIENCES AND ENGINEERING |
BSc PETROLEUM REFINING AND PETROCHEMICAL ENGINEERING |
BSc CHEMICAL ENGINEERING |
The entry requirement for the above programmes are as follows:
Core Subjects: Credits in English Language, Mathematics and Integrated Science
Elective Subjects: Credits in any 3 Electives: Physics, Chemistry, Mathematics, Geography.
NOTE:
Only applicants to the Geomatic Engineering programme can substitute Chemistry with Geography.
Applicants to BSc Land Administration and Information Systems programme should have Credits in any three (3) Business or Science electives or General Arts electives from among these subjects (Economics, Geography, Mathematics, ICT, History and Government) in addition to the above core subjects.
Faculty of Engineering
- BSc MECHANICAL ENGINEERING
- BSc ELECTRICAL AND ELECTRONIC ENGINEERING
- BSc COMPUTER SCIENCE AND ENGINEERING
- BSc RENEWABLE ENERGY ENGINEERING
The entry requirement for the above programmes are as follows:
Core Subjects: Credits in English Language, Mathematics and Integrated Science.
Elective Subjects: Credits in any 3 Electives: Physics, Chemistry, Mathematics, Applied Electricity or Electronics or, ICT or Computer Studies, Technical Drawing or Metal Work.
NOTE:
Applicants to the Mechanical Engineering programme can substitute Chemistry with Technical Drawing or Metal Work.
Additionally, applicants to the Electrical and Electronic Engineering and Renewable Energy Engineering programmes can substitute Chemistry with Applied Electricity or Electronics.
Only applicants to the BSc Computer Science and Engineering programme can substitute Chemistry with ICT, Computer Studies or Applied Electricity.
BSc MATHEMATICS
BSc STATISTICAL DATA SCIENCE APPLICANTS
The entry requirement for the above programmes are as follows:
Core Subjects: Credits in English Language, Mathematics and Integrated Science.
Elective Subjects: Credits in Elective Mathematics and any two (2) of the following Elective Subjects:
General Science: Physics, Chemistry, Applied Electricity, Technical Drawing, ICT and Metal Work.
General Arts: Economics and Geography.
Business: Accounting, Economics and Costing.
BSc CYBER SECURITY
BSc INFORMATION SYSTEMS AND TECHNOLOGY
The entry requirement for the above programmes are as follows:
Core Subjects: Credits in English Language, Mathematics and Integrated Science. Elective Subjects: Credits in any 3 Elective Subjects:
General Science: Physics, Chemistry, Biology, Geography, ICT and Elective Mathematics.
General Arts: Economics, Geography, Elective Mathematics, ICT and Government.
Business: Accounting, Business Management, Economics, Costing, ICT and Elective Mathematics.
Faculty of Integrated Management Science
BSc LOGISTICS AND TRANSPORT MANAGEMENT
BSc ECONOMICS AND INDUSTRIAL ORGANIZATION
The entry requirement for the above programmes are as follows:
Core Subjects: Credits in 3 Core Subjects English Language, Mathematics and Integrated Science or Social Studies.
Elective Subjects: Credits in any 3 Elective Subjects:
General Science: Physics, Chemistry, Biology, Geography, ICT and Elective Mathematics.
General Arts: Economics, Geography, Elective Mathematics, ICT, History, CRS and Government.
Business: Accounting, Business Management, Economics, Costing, ICT and Elective Mathematics.
GCE Ordinary and Advanced Level Certificates Applicants
GCE Ordinary Level Certificate applicants or its equivalent must have credits in 5 subjects including English Language, Mathematics, Physics and Chemistry, and GCE Advanced Level Certificate with passes in Mathematics, Physics and Chemistry.
Mature Applicants
Applicants should be at least 25 years of age and should have WASSCE/SSSCE or GCE O’ Level Certificate with credits in 5 subjects including English Language, Mathematics and a Science subject with experience in the relevant area of study. Applicants must pass a written examination and /or an interview. Moreover, mature applicants must also possess birth certificates which are, at least, five (5) years old after the date of issue.
International Applicants
Applicants with equivalent qualifications will be considered for admission.
Specially Sponsored or Fee-paying Applicants
Applicants who satisfy the University’s minimum entry requirement of aggregate 36 but cannot meet the competitive departmental cut-off aggregate can apply for admission provided they have sponsorship to cover their full fees.
Undergraduate – Diploma Programmes Entry Requirements
Admissions
Diploma in General Drilling (Fee paying Programme)
An applicant must satisfy any of the following:
WASSCE Certificate:
Passes (A1-D7) in English Language, Mathematics, and Integrated Science.
Must posses a minimum of C6 in the following subjects: Physics, Elective Mathematics, Chemistry or Metal Work or Technical Drawing or Applied Electricity or Applied Electronics.
SSSCE Certificate:
Six (6) Passes (A-D) in all subjects which are English Language, Mathematics, Integrated Science, Physics, Elective Mathematics, Chemistry or Metal Work or Technical Drawing or Applied Electricity or Applied Electronics.
GCE ‘O’ and ‘A’ Level Certificates:
General Certificate of Education (GCE) Ordinary Level Certificate credits in five (5) subjects including English language, Chemistry, Physics, Mathematics; or General Certificate of Education (GCE) Advanced Level passes in Chemistry, Physics, and Mathematics.
City and Guilds
City and Guilds of London Institute Part III Certificate or its equivalent in either Mechanical, Automobile, or Electrical Engineering.
Holders of Certificate of Proficiency in General Drilling (one-year course)
from University of Mines and Technology, Tarkwa
or a recognised institution are eligible.
Mature Applicants:
Applicants should be at least 25 years of age and should have SSSCE/WASSCE or GCE O’ Level Certificate with credits in five subjects including English Language, Mathematics and a science subject with experience in the relevant area of study. Applicants must pass a written examination and /or an interview.
Mature applicants must also possess birth certificates which are, at least, five (5) years old after the date of issue.
International applicants: with equivalent certificates and grades are eligible.
Entry Requirements – Certificate Programmes (Weekends)
Admissions
Applicants with WASSCE Certificate
Passes (A-E8) in five (5) subjects including English Language, Mathematics and Integrated Science.
Applicants with SSSCE Certificate
Passes (A-E) in five (5) subjects including English Language, Mathematics and Integrated Science.
Applicants with Ordinary Level Certificate
Candidates must have passes in five (5) subjects of GCE O Level including English Language, Mathematics and Science.
Other Applicants
Candidates should be at least 20 years of age and should have any of the following: Diploma in Business Studies (DBS), Middle School Leaving Certificate (MSLC), National Vocational and Technical Institute (NVTI) Certificate, Technician Part I or II Certificate, Basic Education Certificate (BEC) or its equivalent. In addition, the candidate must pass an interview conducted at the Department.
Notification of Admission:
Once an applicant is selected by the University, an SMS (text) message is sent to the contact number the applicant provided during the application. A list of selected candidates is pasted on the University website (https://portal.umat.edu.gh/apply/admission-list/search) for the information of the general public. Successful candidates are to log into their portal with the pin code and serial number they used for the application to print out their admission letters and other documents.
Fees payment and reporting to campus:
Successful candidates are to adhere to the deadline indicated in their admission letter for the payment of fees. Fresh students are to report at their halls of residence indicated in
their admission on the day of reporting and comply with the directives for successful registration.
Arts to Engineering (Pre-University) Programme
The One-Year Pre-Engineering Certificate Programme at UMaT prepares non-science students with the fundamentals and the necessary STEM courses needed to undertake and excel in any undergraduate programme at this University. Moreover, the Programme employs competency-based methodologies in training non-science students; consequently, the curriculum has been uniquely designed such that the students experience the rich blend of theory and practically oriented teaching that UMaT offers. In addition, to complement the academic work on campus, students are enrolled on various skill training programmes. Here, they are trained and mentored by professionals and experts with diverse engineering backgrounds.
Exploring Interest
In the Pre-Engineering programme at UMaT, not only will you receive a strong foundation in engineering, but also benefit from the uniquely designed curriculum that emphasises critical thinking, problem-solving, entrepreneurial and valuable soft skills needed to create an enabling environment for rapid urbanisation, industrialisation and national transformation. As such, students have the privilege to undertake a range of challenging and specialised mathematics courses (algebra, calculus and differential equations) and science courses (chemistry, physics, computing and others), all taught by dedicated and practically oriented Staff. Students also have access to advanced equipment in our state-of-the-art laboratories for deepening their understanding of the taught courses.
After the successful completion of the programme, qualified students can apply to any of our undergraduate programmes of choice (at any UMaT Campus). These include:
- Geomatic Engineering
- Geological Engineering
- Environmental and Safety Engineering
- Mining Engineering
- Minerals Engineering
- Mechanical Engineering
- Electrical and Electronic Engineering
- Mathematics
- Computer Science and Engineering
- Renewable Energy Engineering
- Petroleum Engineering
- Natural Gas Engineering
- Petroleum Refinery and Petrochemical Engineering
- Petroleum Geosciences and Engineering
- Chemical Engineering
- Statistical Data Science
- Land Administration and Information System
- Economics and Industrial Organisation
- Logistics and Transport Management
Curriculum
While at UMaT, a pre-engineering student should plan on taking at least four courses each semester. In addition, students must satisfy the requirements of the chosen undergraduate programme (NB: programme requirements may vary, details can be found on the programme’s website). All students must complete all mandatory and core courses, and at least one chosen elective in the second semester. Selection of elective courses will be done in consultation with the Coordinator.
Semester One (Mandatory Courses)
Course Code | Course Title |
AE 001 | Mathematics I |
AE 002 | Chemistry I |
AE 003 | Physics I |
AE 004 | Fundamentals of Engineering |
Semester Two (Mandatory and Elective Courses)
Course Code | Course Title |
AE 005 | Mathematics II |
AE 006 | Physics II |
*AE 007 | Chemistry II |
*AE 008 | Geography |
*AE 009 | Applied Electricity |
*AE 010 | Information Communication Technology |
*AE 011 | Technical Drawing |
* Elective Course – Students will have the option to select one (1) elective course in addition to the two (2) mandatory courses (Mathematics II and Physics II). The elective course selected will depend on the undergraduate programme the student intends to enrol in.
Arts to Engineering (Pre-University) Programme – Admission Requirements
Target Group
Senior High School graduates with backgrounds in Business, General Arts and Visual Arts, who desire to pursue engineering programmes at the tertiary level qualify to apply.
Admission Requirements
- WASSCE Applicants should have credit passes (A1 – C6) in two (2) electives and three (3) core subjects, i.e., English Language, Mathematics, and Integrated Science.
- SSSCE Applicants should have credit passes (A – D) in two (2) electives and three (3) core subjects, i.e., English Language, Mathematics, and Integrated Science.
You can also read about about other schools at https://mcchrisconsult.com/#google_vignette
You can also visit the school site at https://umat.edu.gh/
Comments 1
Please what is the cutoff points for bsc of Mining Engineering